EMC VMAX 100K Product Manual Download

Page: 198 / 200

Table 51 Individual licenses for open systems environment (continued)

License

Allows you to

VIPR Controller

Automate storage provisioning and
reclamation tasks to improve operational
efficiency.

AppSync

Manage protection and replication for critical
applications and databases for Microsoft,
Oracle and VMware environments.

Events and Retention Suite

Protect data from unwanted changes,
deletions and malicious activity.

Encrypt data where it is created for
protection anywhere outside the server.

Maintain data confidentiality for selected
data at rest and enforce retention at the
file-level to meet compliance
requirements.

Integrate with third-party anti-virus
checking, quota management, and
auditing applications.

Mainframe licenses

This section details the licenses available in a mainframe environment.

License packs

The following table lists the license packs available for arrays running HYPERMAX OS
in the mainframe environment.

Table 52 License suites for mainframe environment

License pack

Entitlements in license
file

Included features

Total Efficiency Pack

SYMM_VMAX_ENGINUI
TY

SYMM_VMAX_FAST_VP

SYMM_VMAX_UNISPHE
RE

SYMM_VMAX_TIMEFIN
DER

SYMM_VMAX_SRDF_RE
PLICATION

HYPERMAX OS

DCP

OR-DM

Unisphere for VMAX

FAST VP

SRDF

SRDF/Synchronous

SRDF/Asynchronous

SnapVX

Licensing

198

Product Guide

VMAX 100K, VMAX 200K, VMAX 400K with HYPERMAX OS

Summary of Contents for VMAX 100K









































































































































































































Search results

Summary of Contents for VMAX 100K

Reviews:

Related manuals for VMAX 100K

Brands by name

Popular brands

EMC VMAX 100K, Product Manual

Search results

Summary of Contents for VMAX 100K

Reviews:

Related manuals for VMAX 100K

Brands by name

Popular brands