- To minimize any kinds of damages from electromagnetic wave, we recommend to place the camera at least 8 inches away
from human body.
- The waterproof housing must be checked for leaks before each use. The seal must be clean and undamaged. Check the
sealing before each use by a dive without the camera.
- We accept no liability for any damage caused by leaks in the casing.
- Attach the camera always in a way, that it does not get lost in a possible drop off self adhesive pad or at a breaking of other
mounting parts. Secure the camera always in addition, for example by attaching a safety line to the camera housing. We
assume no liability for direct or indirect damages caused by the failure of hardware.
- Do not attach the camera to the outside of vehicles, if you are participating in public traffic, or if the camera is causing
danger to others in a possible fall.
- Battery, seals, and mounting parts are aging, depending on frequency of use and ambient conditions
(for example sunlight, temperature, humidity, vibration). Therefore this parts needs to be replaced regularly.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user’s authority to operate the equipment.
