2
Installing a Deskside DPE
2-5
Installing a Deskside DPE
Figure 2-2
Turning Power Off
4. Unlock and open the DAE front door as shown below.
Figure 2-3
Unlocking and Opening the Front Door
5. Each DAE must have a unique enclosure address (EA), referred to
as the back-end address, that identifies the DAE and determines
disk module addresses. Because the back-end address 0 is
Power switch
Key
A. If the door is locked:
Insert the key in the door’s latch.
Turn the key 180 degrees clockwise
B. Push the door’s latch.
C. Swing the door to the left.
CAUTION
Do not force the door
open. If the door snaps off the hinges,
reinstall it by positioning it at a 45-degree
angle to the enclosure and snapping it
into the hinge openings.
Latch
