14
Install - Step 1 continued
Install the storage-system hardware
Securing the SPS units onto the tray
To eliminate potential bow caused by the weight of the SPS(s), press up on the middle of the tray
with one hand while you secure the units to the tray. (The tray will not bow if placed on the bottom
of the cabinet.)
g. Attach the front fastening bracket, and insert and tighten the six M4 x 10-mm
flathead securing screws as shown above.
h. Insert and tighten the eight M4 x 8-mm panhead securing screws that secure
the SPS units to the back of the tray, as shown above.
B
a
ck
Front
EMC
3
251
S
crew (6)
S
crew (
8
)
