EMBRON Hatteland HT20 70 Series, User Manual

Page: 41 / 154

User Controls / Physical Overview
41
IND100133-82
Module Expansion Matrix
Table below indicates how many duplicates of the same module can be installed at the same time. Due to limited
number of internal connectors, available space and technical limitations, some combinations (with duplicates) are
naturally not possible to achieve.
Factory Standards
The following illustration indicate mounting locations of the varirty of modules available and how they are numbered to
keep a persistent configuration at our factory. This is seen from user’s Point-of-View at rear of the unit.
Priority List amongst module installed in Expansion Area 1 and 2
1: COMx2 [A]
2: NMEA COM [B]
3: CAN [C]
4: DIO [D]
5: LAN [E]
Priority numbering starts from Left going to Right as illustrated for models with 2 x module areas:
1
2
Table on next page indicates how many combinations of modules is possible to install (each table row totals upto max
2) for the Long Depth Models. Further, as per. factory standards, the unique location and shifting of modules are illus-
trated in the last column, where the number inside the table indicate unique id, starting from 1 to max 2 modules.
2 1