EMBRON Hatteland HT20 70 Series, User Manual

Page: 136 / 154

136
IND100241-41
Appendix
Pinout Assignments
Connectors illustrated here are either standard by factory default or may be available (through factory customization).
Note that some combinations may not be possible due to space restrictions. List also valid for customized models. All
pin out assignments are seen from users Point of View (POV) while looking straight at the connector. Please review
the dedicated datasheet or technical drawings for your actual unit to identify and determine the presence of desired
connector. Detailed information about Housing Connectors (terminal blocks) can be found earlier in this manual.
Serial COM RS-485/RS-422, 9-pin DSUB Male
“Full Duplex Mode*
1 2 3 4 5
6 7 8 9
PIN 01 TxD- Transmit Data Negative
PIN 02 TxD+ Transmit Data Positive
PIN 03 RxD+ Receive Data Positive
PIN 04 RxD- Receive Data Negative
PIN 05 GND Signal Ground
PIN 06 N/C No internal connection
PIN 07 N/C No internal connection
PIN 08 N/C No internal connection
PIN 09 N/C No internal connection
*Master only. ECHO not supported.
Serial COM RS-485/RS-422, 9-pin DSUB Male
“Half Duplex Mode*
1 2 3 4 5
6 7 8 9
PIN 01 Data- Data Negative
PIN 02 Data+ Data Positive
PIN 03 N/C No internal connection
PIN 04 N/C No internal connection
PIN 05 GND Signal Ground
PIN 06 N/C No internal connection
PIN 07 N/C No internal connection
PIN 08 N/C No internal connection
PIN 09 N/C No internal connection
*ECHO not supported.
Flow control: Via RTS signal (controlled by user application).
Note: Configuration performed in computer BIOS
Note: Configuration performed in computer BIOS
9-pin USB3.0/3.1/3.2 TYPE A
1 2 3 4
9 8 7 6 5
PIN 01 VCC +5V VBUS / Power
PIN 02 D- Negative Data
PIN 03 D+ Positive Data
PIN 04 GND Ground
PIN 05 StdA_SSRX- SuperSpeed Receive Negative Data
PIN 06 St SuperSpeed Receive Positive Data
PIN 07 GND DRAIN Ground for signal return
PIN 08 StdA_SSTX- SuperSpeed Transmit Negative Data
PIN 09 St SuperSpeed Transmit Positive Data
24-pin USB-C TYPE A
1 2 3 4 5 6 7 8 9 10 11 12
12 11 10 9 8 7 6 5 4 3 2 1
A
B
Pin A1 GND Ground return
Pin A2 SSTXp1 SuperSpeed diff erential pair #1, TX, positive
Pin A3 SSTXn1 SuperSpeed diff erential pair #1, TX, negative
Pin A4 VBUS Bus power
Pin A5 CC1 Confi guration channel
Pin A6 Dp1 USB 2.0 diff erential pair, position 1, positive
Pin A7 Dn1 USB 2.0 diff erential pair, position 1, negative
Pin A8 SBU1 Sideband use (SBU)
Pin A9 VBUS Bus power
Pin A10 SSRXn2 SuperSpeed diff erential pair #4, RX, negative
Pin A11 SSRXp2 SuperSpeed diff erential pair #4, RX, positive
Pin A12 GND Ground return
Pin B12 GND Ground return
Pin B11 SSRXp1 SuperSpeed diff erential pair #2, RX, positive
Pin B10 SSRXn1 SuperSpeed diff erential pair #2, RX, negative
Pin B9 VBUS Bus power
Pin B8 SBU2 Sideband use (SBU)
Pin B7 Dn2 USB 2.0 diff erential pair, position 2, negative
Pin B6 Dp2 USB 2.0 diff erential pair, position 2, positive
Pin B5 CC2 Confi guration channel
Pin B4 VBUS Bus power
Pin B3 SSTXn2 SuperSpeed diff erential pair #3, TX, negative
Pin B2 SSTXp2 SuperSpeed diff erential pair #3, TX, positive
Pin B1 GND Ground return