EMBRON Hatteland Display HD 07T22 MMC Series, User Manual

Page: 47 / 56

47
IND100241-27
Appendix
Pinout Assignments
8-pin RJ45 10/100/1000Mbps LAN/Ethernet
1 2 3 4 5 6 7 8
PIN 01 D0P+ Differential Pair 0 (Positive)
PIN 02 D0N- Differential Pair 0 (Negative)
PIN 03 D1P+ Differential Pair 1 (Positive)
PIN 04 D2P+ Differential Pair 2 (Positive)
PIN 05 D2N- Differential Pair 2 (Negative)
PIN 06 D1N- Differential Pair 1 (Negative)
PIN 07 D3P+ Differential Pair 3 (Positive)
PIN 08 D3N- Differential Pair 3 (Negative)
Connectors illustrated here are either standard by factory default or may be available (through factory customization).
Note that some combinations may not be possible due to space restrictions. List also valid for customized models. All
pin out assignments are seen from users Point of View (POV) while looking straight at the connector. Please review
the dedicated datasheet or technical drawings for your actual unit to identify and determine the presence of desired
connector. Detailed information about Housing Connectors (terminal blocks) can be found earlier in this manual.
4-pin USB TYPE A
Pin 2: Negative Data
Pin 1: VCC +5V Pin 3: Positive Data
Pin 4: Ground
2-pin DC Power Input,
Pin 2: Negative - Pin 1: Po
5-pin Module
“RS-422/RS-485 SCOM”
1 2 3 4 5
PIN 01* RxD+ Receive Data Positive
PIN 02* RxD- Receive Data Negative
PIN 03* TxD+ Transmit Data Positive
PIN 04* TxD- Transmit Data Negative
PIN 05 GNDR Ground 100Ω
*Pin 1,2,3,4 = RS-485 Full Duplex (4-wire)
*Pin 3,4 = RS-485 Half Duplex (2-wire)