background image

11

Touch screen

IND100110-13

Touch Screen Drivers and Documentation

All units are shipped with a Documentation and Drivers DVD or CD which

contains suitable drivers

*

 for touch screens. (Named MEDIA STD01).

You can also visit our website 

www.hatteland-display.com/archive

 to view the same

list (or even recently new added products) for our models with touch screen. 

Before using the touch screen, it should be calibrated for your system. 

Please install the 3rd party software

*

 and use the Calibrate function.

For additional touch controller/screen documentation and updated drivers

*

, please 

visit the 3rd party manufacturer website as found in the Touch Screen Wizard menu.

*General Note:

Newer Operating Systems (OS), from year 2011 and above, do not specifically require additional 3rd party drivers in order to operate the touch 

screen and support “Multitouch”. For example; Microsoft® Windows® 7 and above comes with default factory installed Windows HID drivers fully 

supporting “Multitouch”. You may choose to install 3rd party drivers for example during trouble-shooting situations or to review features of the 3rd 

party software. Hatteland Display suggests that you should use factory default Microsoft® Windows® 7 HID touch drivers in any case possible.

For older Operating Systems (like Microsoft® Windows® XP and older), before year 2011, the OS does not not support “Multitouch” technology and 

the touch screen will just operate as a ordinary single-point touch screen. Additionally to get touch screen working at all in older OS, you need to 

install 3rd party drivers.

Note that the lack of “Multitouch” support is not dependent on hardware or software/firmware for the controller specifically, but rather dependent on 

important core functions in the Operating System which are outside control of the 3rd party software.

Summary

Microsoft® Windows® 7 / Microsoft® Windows® 8 / Microsoft® Windows® 8.1 / Microsoft® Windows® 10 IoT 

- All HD xxT21 / T22 / MVD units

:

- Please use Windows® Generic HID driver, no specific driver needed to use multi-touch.

Microsoft® Windows® 7 32 bit only

- HD 07T22 / HD 13T22 units

:

- Please use Windows® Generic HID driver, no specific driver needed to use multi-touch. 

Linux (openSUSE® 11.4, Fedora™ 15, Ubuntu® 10.04 LTS, Ubuntu® 12.04 LTS)

- All units:

- Please use Linux Generic Touch driver.

  Note: Kernel before 2.6.38: Single touch support.

  Note: Kernel above 2.6.38: Multi touch support.

*32bit only available for HD 07T22 / HD 13T22 units. Other units, 32/64 bit supported.

------------------------------------------------- Note: Windows® XP is End Of Life ---------------------------------------------------------- 

 

 

 

Reference: 

http://www.hatteland-display.com/mails/09_2016_eol.html

Microsoft® Windows® XP

 

- 24 and 26 inch HD xx21 units:

- Please use Touch Screen Driver Wizard and install PCT Touch Utility, example PtouchUtility-1.0.0.4-150326.exe.

  Reference August 2015: 

http://www.hatteland-display.com/mails/21_2015_ecn.html

Microsoft® Windows® XP

- 8, 12, 13, 15, 17 and 19 inch HD xxT21 units:

- Please use Touch Screen Driver Wizard and install eGalaxTouch Drivers (XPE_5.11.0.9223).

------------------------------------------------- Note: Windows® XP is End Of Life ---------------------------------------------------------- 

Touch screen products

Summary of Contents for Hatteland Display HD 07T22 MMC Series

























































Reviews: