EMBRON Hatteland Display HD 07T22 MMC Series, User Manual

Page: 31 / 56

31
IND100129-187
All specifications are subject to change without prior notice!
Specifications - HD 13T22 MMC-xxx-xxxx
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
2/2
• W:355.00 [13.98''] x H:248.50 [9.78''] x D:66.31 [2.60''] mm [inch]
• Weight: 2.9kg / 6.3lbs
Power Supply:
• 12-24VDC (Nominal)
Power Consumption:
• Operating : 17W (typ) - 20W (max)
• 13.3 inch TFT Liquid Crystal Display module, TN (Twisted Nematic)
• a-si TFT Active Matrix, Widescreen, Aspect Ratio 16:10
• LED Backlight Technology
• Native Resolution : 1280 x 800 (WXGA)
• Pixel Pitch (RGB) : 0.0745 (H) x 0.2235 (V) mm
• Response Time : 16ms (tr+tf) (typ)
• Contrast Ratio : 800:1 (typ)
• Light Intensity : 500 cd/m 2 (typ)
• Viewable Angle : 60 deg. (up/down) - 70 deg. (left/right) (typical)
• Active Display Area : 286.08 (H) x 181.8 (V) mm
• Max Colors : 16.7 million (24bit)
• OS Options : None or see table below
• CPU/Processor : 1 x Intel® Atom™ N2600™ (Dual Core 1.60GHz)
• Storage Options : None or see table below
• Memory Options : 1 x 2GB Single Channel, SO-DIMM (w/o ECC)
• System Chipset : Intel® NM10 Express Chipset (CG82NM10 PCH)
• Graphics Chipset : Intel® Graphics Media Accelerator 3600 (GMA)
• Ethernet LAN #1 : Realtek LAN 10/100Mbps
• Ethernet LAN #2 : Intel Gigabit LAN 10/100/1000Mbps
• BIOS : AMI BIOS, supports ACPI
• Speaker : None
• Buzzer : Yes (according to EN60945)
• WatchDog Timer : Yes (256 segments, 0, 1, 2...255 sec/min)
• Other features : GPIO, WakeOnLan, Fast Boot, AT mode, USB Boot
• Resolution Range : From 640x480 @ 60 Hz to 1280x800 @ 75 Hz*
* Native 1:1 resolution recommended is 1280 x 800 @ 60 Hz.
A P P R O V A L S & C E R T I F I C A T E S
Environmental Considerations:
Power Specifications:
Physical Dimensions:
TFT Characteristics:
TFT Technology:
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) IACS E10 EU RO MR - Mutual Recognition (covers DNV, BV, ABS, GL, NK and LRS certificates)
Compass Safe Distance: Standard: 25cm Steering: 15cm
Computer Specifications:
Type Description Size/Speci  cation
Storage 1 x SSD mSATA, Multi Level (MLC) - 32GB, 64GB, 128GB
See "Disks provided" table below
OS Microsoft® Windows® Embedded
Enterprise, Linux or customized
image
- Win 7 Pro Eng, 32bit
- Win 7 Standard Eng, 32bit
Software
Support
Application Programming Interface
(API) - as defined in associated
documents
- CAN
- SCOM (COM1)
- Interrupt Packages (COM1)
Available Computer Configurations:
Behind front bezel - Glass Display Control™ (GDC) IP66:
• 3 x Configurable buttons, Programmable Status RGB LED,
• Buzzer, (through glass) Light Sensor (behind glass)
User Controls:
Disks provided by Hatteland Display:
# Over-provision % Capacity [GB] TBW [TB]
1 20% 32 9
2 20% 64 19
3 20% 128 38
Note:
Over-provision = reserved disk space in percent. This area can't be used for customer application, e.g.
8GB device 20% over-provision gives 6.4GB for customer application.
Note: TBW (Total Bytes Written) - the number in table above is the guaranteed value, i.e. the total number
of bytes that can be written to the disk in worst case scenario.
To calculate required TBW:
1. De  ne expected life time [year].
2. Calculate and/or measure the amount of written data per day (host) [GB/day].
3. Calculate minimum required TBW, TBW = expected lifetime x 365 x amount of written data per day.
4. Select disk from the table (required TBW should be lower than TBW value in the table).
5. Check that the disk ful  ls footprint (size of OS + application) requirement, if not select next (larger) SSD.
Recommendation: if the required TBW is not well known/de  ned, the next larger device should be
selected (adding safety margin).
Input/Output Interfaces:
• 4 x USB2.0 Type A
• 1 x Ethernet RJ45 / LAN (10/100Mbps)
• 1 x Ethernet RJ45 / LAN (10/100/1000Mbps)
• 1 x RS-485/RS-422 Isolated (full/half duplex) (COM2). T. Block 3.81*
SCOM/Remote Control/Buzzer. *shield cable required for type approval.
• 1 x Power Input, 2-pin Terminal Block 5.08
• Operating : Temperature -15 deg. C to +55 deg. C
Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
Humidity up to 95%
• IP Rating : Protection: IP66 front - IP22 rear (EN60529)
• Additional Testing : Vibration: 2-25Hz 1.6mm peak; 25-100Hz 4G*
Temperature : 70C duration 16h *
Shock: 5g 10ms & 20g 11ms
*DNVGL-CG-0339 Edition November 2015. Tested
according to temperature class B and vibration class B
Lifetime Considerations:
Even though the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
• 2 x CAN Isolated module, 2 channels
• 2 x DO Isolated (Digital Output)
• 5 x DI Isolated (Digital Input + 1 x Keyswitch Config)
Prepared For:
• Optical Bonding Technology
• Variations of SSD Storage, Operating System
Factory Options:
• Projected Capacitive Touch Screen (Multitouch, USB interface)
• AG Coated Front Glass
• Dust Covers for USB and RJ45 ports
• USB Cable Support Bracket
• Console Mounting Bracket Kit (HD CMB SX2-C1)
Factory Defaults:
• HD CMB SX2-C1: 1 x Console Mount Kit. EN60945 Tested.*
*Included with delivery
Accessories: