page - -
4. LAMINATINg
Before inserting the printed matter into the laminator, make sure, that the laminating film is free of
wrinkles and clean. These kind of disturbances can be transferred to the final product and can dama-
ge it irreversibly. It is necessary to feed the printed matter flat and straight by hand over the feeding
plate untilcontact with the laminating film. Now, the EASYLAM junior II can be started with the foot
pedal. If necessary smoothen the material by hand. When entered between the laminating rolls, the
printed matter is sealed with laminating film and leaves the laminator through the rear cover. The
movement of the printed matter should be smooth (without stopping). After the printed matter has
passed through, a further print can be inserted (allow for a small distance between the jobs) or the
work can be terminated.
5. PARKINg OF THE FILM, TERMINATION OF LAMINATION
When the work is to be interrupted for a short time, insert a parking stripe (paper, foil etc.with dimen-
sions approx. 10 cm x width of the package) in order to prevent the adhesive from sticking on the
pressure rolls. If the film reel has to be changed, or the work is to be interrupted for a longer time,
wind the film up back into reel and store in accordance with manufacturer's recommendations. When
the work is terminated, cover the EASYLAM junior II with a dust protection. It also is recommend to
disconnect the power source from mains.
pressure rolls
laminate
laminating axle
take-up for
backing paper
front feeding
plate
DIAgRAM FOR LOADINg THE LAMINATINg FILM
