page - 10 -
Take-Up of backing paper
The backing paper is fastened up to take-up by means of plastic clamps. After the work is done,
cut the backing paper and remove it from the take-up.
Notice
Never overpower the springs by forcing the turning the lever in the lower position.
There is a danger of damaging the laminator (springs)!
C Mounting:
Mounting of materials between 25 - 30 mm thickness
1. Lift lever.
. Both adjusting screws screw to lower stop position in clockwise rotation.
. Put the mounting plate between the pressure rolls. Turn on the pressure rolls. Press down the lever
carefully until both pressure rolls are rotating. Now you have the right pressure.
7. MAINTENANCE, SERVICE
EMBLEM EASYLAM junior II has been designed as a maintenance-free device for professional use,
which does not require special user's care.
•cleaning - with technical gasoline, alcohol
•pressure roll maintenance: use an agent for regeneration of rubber parts (for instance silicone oil),
approximately once a month
•the use of laminating film from the EMBLEM range is recommended.
•for service, please contact your local dealer.
