page - -
1. DESCRIPTION OF THE EMBLEM EASYLAM jUNIOR II LAMINATOR
EASYLAM junior II is a cold-laminator for large-format prints. It allows laminating and sealing, ma-
terial up to maximal width of 1400 mm and a thickness of 0 mm. With its rugged design, a simple
mechanical construction and the 1 V = system supply, the laminator ensures reliability, safety and
long life time with minimal maintenance requirements.
Laminating film is placed on the top rollers, which have an easy to clean surface finish. The lamina-
ting pressure of the rubber coated pressure rolls is controlled by means of a lever. Adjustable springs
allow the height adjusting of the unit, which enables to open the pressure rolls for material up to 0
mm thickness.
EASYLAM junioris II provided with an electric motor, which is controlled by means of foot-operated
regulating pedal, and a separate switch for continuous running.
The torsion moment is transferred through an indented belt onto the inner axis of the rubber coated
pressure roll. When under increased pressure, deflection of laminating rolls is noted the pressure must
be reduced. The material to be laminated (paper, foil, thin plastic) is inserted via the front feeding
plate. Its radius eliminates possible transversal corrugation.
With the possibility to use material without interlayer silicone paper (like Application Paper) next to
regular laminating film, and the simple application, this laminator becomes a very efficient, fast, and
easy to use tool for everyday use. Of course the laminator also is equipped for winding interlayer
paper as used with standardand special films.
The universality and cost efficiency of EASYLAM junior II makes it to the perfect laminator for use under
professional conditions when small numbers of pieces are produced (advertising studios, printing
offices, offices, copy centres, etc.).
2. PREPARATION AND INSPECTION OF THE LAMINATOR BEFORE OPERATI-
ON
EASYLAM junior II can be operated in normal workshop or office environment, under regular tem-
perature and humidity conditions. Dust and dirt represent a considerable risk factor,which may effect
the quality of output. Before starting the job it is recommended :
• to check that metal rollers, pressure rubber rolls and feeding plate are clean. (if necessary clean
with antistatic dust-cloth and / or cleaning alcohol)
•to switch on the laminator and check its function.
•to provide work space around the laminator for material in- and output.
