SD32+
System
Introduction
3.6.
Sandman elink™
adapter
The
Sandman elink
adapter serves as a bridge to “link” the
SD32+
amplifier to the computer. This
enables the computer to send programming commands to, and receive sleep study data from, the
SD32+
amplifier.
The following figures show the
Sandman elink
adapter:
Figure 8.
Sandman elink
adapter
1.
DC OUT
- (Circular, 4 contact, Female, Triad connector). Supplies the
SD32+
amplifier
with DC voltage.
2.
DC IN
- (Circular, 4 contact, Male, Triad connector). Isolated DC input Connector; accepts
the DC voltage output from the External Medical Grade AC/DC Adapter.
3.
LAN
- (RJ45 connector) Local Area Network, 10/100 Mbps Ethernet interface.
4.
Serial
AUX I/O
-
(A)
- (Circular, 8 contact, Female, HiRose connector). Connects to
peripheral devices using the RS232 communications protocol. Only use devices approved
by Embla Systems for use with the
Sandman elink
adapter.
5.
Serial
AUX I/O
(B)
- Same as “Serial AUX I/O – (A)” above.
6.
Trigger I/O -
Reserved for future use.
7.
Analog out Link
- Reserved for future use.
8.
OPTICAL LINK
– (Dual-strand fiber optic connector) Used to communicate with the
SD32+
amplifier.
9.
Power on LED
- Power status indicator.
10.
LAN activity LEDs
- Indicate various LAN states.
19
