iMX RT1052 OEM Developer’s Kit - User’s Guide
Page 9
Copyright 2018 © Embedded Artists AB
The next step is to open a terminal application and attached it to the Virtual COM port that has just
been created. The baud rate should be
115200
.
Some development environments/IDEs have a built-in terminal application that can be used.
Sometimes it is better to have a terminal application with more features. For increased flexibility, we
recommend using any of the two alternative terminal applications presented in the following sub-
sections.
2.3.1
Tera Term Terminal Emulation Application
We recommend that you use
Tera Term
which can be downloaded and installed from either of the
links below.
https://ttssh2.osdn.jp/index.html.en
http://sourceforge.jp/projects/ttssh2/releases/
Launch
Tera Term
. The first time it launches, it will show you the following dialog. Select the serial
option. Assuming the USB cable is connected to the
iMX OEM Carrier Board
, there should be a COM
port automatically populated in the list.
Figure 4 – Tera Term New Connection Window
Configure the serial port settings (using the COM port number identified earlier) to 115200 baud rate, 8
data bits, no parity and 1 stop bit. To do this, go to Setup
Serial Port and change the settings.