21
5.5 CONTROLS
Before starting to work, all operators should
familiarize themselves with the location and
function of controls.
1.
Gas Engine:
Read the engine manufacturers op-
erator's manual before starting for more
detailed instructions.
a. Ignition Switch:
This switch controls the electrical
power to the engine electrical system.
Turn the switch counter-clockwise to
turn OFF. Turn clockwise to the first
position for ON.
b. Choke:
This lever controls the position of the
choke. Slide the lever to the left to
close the choke valve for starting when
the engine is cold. Slide to the right to
open the choke as the engine warms.
Always open the choke fully when op-
erating the machine.
c. Throttle:
This lever controls the engine RPM.
The engine always runs at maximum
RPM when operating.
d. Fuel Shut-Off Valve:
This valve controls the fl ow of fuel to
the engine. Turn the valve at right an-
gles to the fuel line to turn the fuel off
and parallel to turn the fuel on.
e. Starting Rope:
This retracting rope and T-bar is used
to turn the engine over for starting.
Grasp the T-bar fi rmly and pull the rope
sharply to start the engine. Close the
choke if the engine is cold.
Fig. 4 ENGINE CONTROLS
EC2500
EC2600
a
b
c
d
e
a
b
c
d
e
