Tinyhawk
15
emax-usa.com
configuring a new radio please configure your radio as described above or change
these settings in Betaflight Configurator.
PID profiles: PID profile 1 is tuned and optimized for Tinyhawk for ultimate control of
flight indoors and outdoors. Please do not change these values.
Rate Profiles: Profile 1 is designed for optimal indoor flight control. Profile 2 is similar
to profile 1 with a bit more sensitivity to allow rolls and flips flying in doors. Profile 3 is
a more sensitive rate profile tuned for people who like to fly “pincher” style. These
profiles can easily be switched in Betaflight OSD menu.
Adjusting Software Settings (Betaflight Configurator)
Betaflight Configurator can be used to changed programmed settings on Tinyhawk
and to flash new firmware if desired. Betaflight Configurator and flight controller
firmware can be downloaded at
https://github.com/betaflight/
. The hardware target for
Tinyhawk Flight Controller is MatekF411.
DISCLAIMER
: We do not suggest changing any PID settings on Tinyhawk or
upgrading the firmware to new versions. Tinyhawk comes stock with an optimal tune
for superior flight performance. Changing this can affect flight time, overall speed,
control of the aircraft, and excessive heat within the motors.
Reprogramming Tinyhawk Flight Controller
1. Put the Flight Controller in DFU mode by pressing the BIND button while
plugging in the micro USB cable to a computer.
2. Select MATEKF411 as the target and then select the firmware (3.5.0). Select
Manual Baud Rate with 256000 in the drop down menu
3. Select Load Firmware(Online) to download the firmware
4. Select Flash Firmware to program the flight controller
Set the Correct Settings
Download the latest CLI Dump File from https://emax-usa.com/
Connect Tinyhawk to Betaflight configurator and select the CLI tab
