IMPORTANT SAFETY AND INSTALLATION INSTRUCTIONS P2
1. IMPORTANT SAFETY AND INSTALLATION INSTRUCTIONS
P l e a s e re a d t h e m a n u a l c a re f u l l y b e f o re c o m m e n c i n g i n s t a l l a t i o n . T h i s m a n u a l c o n t a i n s important
information about the correct installation and operation of lights.
1. Only qualified electrician is allowed to carr y out the installation of this product.
2. Avoid direct contact with electrical power.
3. Respect all regulations in effect for preventing accidents.
4. All units are required to be disconnected from the main electricity before any operation of maintenance.
5. For safe and proper installation, ensure that those parts supplied with the produce are used.
6. Never handle with wet hands and feet.
7. This unit is design for use only when fully submerged in fresh water, connecting with a safety transformer
8. This product should be installed according to your local electrical installation ordinances and regulations.
9. Due to the corrosive nature of unbalanced pool chemicals, please keep you pool water is acid-base balanced
prior to installation, and ensure the longevity of these lights.
10. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his ser vice agent or a similar qualified person in order to avoid a hazard.
11. Check that there is enough cable behind light to allow for ser vicing above water, preferably at ground-level
pool-side.
12. Never operate this Under water Light for more than 1 minute unless it is totally submerged in water.
13. You lights require cleaning at any time, be sure to a mild detergent or other ways that don't damage to the
lights.
14. Be sure power is off before installing or removing light. Allow light to cool before replacing.
15. Maximum Depth for Light installation at 1.2 meter.
16. Maximum Water Temperature Range for light operation 0-25°C
For non replacable lightsources: ” The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced”.
For operation only with safety isolating transformer conforming with AS/NZS 61558 series.
2. PRODUCT INTRODUCTION
2.1 TRANLIGHTS
When the light is connected to the transformer directly, to on /off the main switch to controls the color changes.
For LED-P100/TP100/CP100 RGB, When it’s different colors, turn off the lights, wait 3-5S and turn on the lights,
it’s the same colors.
1
UL-NS75/150
Key No.
Part No.
Description
Qty
1
01051169
Face Ring for UL-NS75
1
1
01051170
Face Ring for UL-NS150
1
2
01041037
Lens for UL-NS75
1
2
01040208
Lens for UL-NS150
1
3
02021027
Waterproof Washer for UL-NS75
1
3
02021062
Waterproof Washer for UL-NS150
1
4*
E041204
Bulb 12V/ 75W for ULH/ UL-NS
*
5
89043704
Stainless Steel Lights Face Plate for UL-NS75
1
5
89043703
Stainless Steel Lights Face Plate for UL-NS150
1
6
03011016
M5*15 Screw on Face Plate
1
7
03011127
M5*8 Screw for UL-NS75 &- NS150
*
8
02021036
O-Ring for Face Plate (UL-NS75)
1
8
02021028
O-Ring for Face Plate (UL-NS150)
1
9
03011149
M6*40 Mounting screw
4
10
01051171
Mounting Bracket for UL-NS75
1
10
01051172
Mounting Bracket for UL-NS150
1
11
02011158
Gasket
2
12
89043702
Wall Bracket
1
P13 SPARE PART LIST
2
3
4
5
6
7
8
9
10
11
12
