P5 LAMP INSTALLATION
1) The circuit system must comply with local laws and regulations and must be carried out by suitably qualified
installers.
2) Make sure the voltage is 12V and the terminal box is at least 120cm from the poolside .
3) Upon installation, top of the light must be at least 45cm from water surface.
5.2 UL-P100 LED-P100 UL-CP100 LED-CP100 UL-NS75/150
INSTALLATION
A) Concrete Pools Installation
1 Embed the Wall Mount into the concrete wall, making sure that it is parallel to the side of the pool.(Figure 4).
2) Place the Mounting Plate on the concrete wall and tighten it with 4 screws. The Conduit must be next to the
Mounting Plate (Figure 5).
3) Note that the light must only be installed on a flat or concave surface.
4) Wrap extra cables behind the light to make sure it could be taken to the pool surface for future maintenance
(Figure 6).
5) Hang the light onto the Mounting Plate and tighten the screws (Figure 7).
6) The wire connections inside the terminal box must be sealed by leak-proof tapes to prevent water from leaking
into the terminal box through the cables.
)
DO NOT MOUNT ON:
Reverse radius
surface
Irregular or uneven surfaces
DO MOUNT ON:
Flat surface
Walls with no tighter
Radius as Viewed from top
Than 6 ft.
Figure 6
Figure 7
Figure 4
Figure 5
NS75/150
P100/CP100
TP100
SPARE PART LIST P10
LED-TP100
Key No.
Part No.
Description
Qty
1
01050119
Lights Face plate
1
2
03011364
M4*12 Screw
1
3
04011109
Bulb plate 12V/8W 198LEDs For White Colour
1
3
04011110
Bulb plate 12V/8W 198LEDs For Colour-changing
1
3
440546887
Bulb plate 12V/8W 198LEDs For Warm White Colour
1
3
04011113
Bulb plate 12V/8W 198LEDs For Blue Colour
1
4
03011364
M4*12 Screw
2
5
01012005
UL/LED-TP100 Lights Bracket
1
6
03011363
M4*16 Screw
2
7
89040401
UL/LED-TP100 Lights Vinyl pool Fitting
1
8
89040501
LED-TP100 Lights Concrete Pool Fitting
1
3
1
2
4
6
5
Vinyl
Pool
7
Concrete
Pool
8
5.1 Preparing to Install
Concrete must be cut backaround niche
to allow fora compact plaster seal
120cm min.
Water level
Rigid conduit
Junction box
45cm min. from water
line to top of lens
6.6cm
29.6cm
5. LAMP INSTALLATION
