INSTALLATION NOTES P4
4. INSTALLATION NOTES
1. It is recommended to install a light ever y 20
, the approximate exposure area of each unit.
2. The lights should be installed in the direction that they will not shine directly into the house.
3. For training or competition pools, the lights must be installed on the sides in order to prevent swimmers from
seeing any glare.
4. Nothing should be placed on the pool side directly above the lights for ease of future maintenance.
5. The cables connecting the lights and the transformers must be at least 6mm² and the distance between them
must not exceed 30m; other wise the lights will not function properly.
6. Terminal blocks must meet the IEC60988-2-1 standard having the rated connecting capacity of 4,0mm² use of
screw-type terminal at least 25A current rating, mounted on junction boxes inside.
m²
Mode E: RGB Colour Sequence: Red>Green>Blue
Mode F: Four Colour Sequence: Red>Green>Blue>Purple
Auto Colour Change
White
Green
Green+Blue
Red+Blue
Mode B: Green+Gradual Red
Blue
Red+Green
Mode C: Blue+Gradual Green
Mode A: Blue+ Gradual Red
Mode D: Blue+Gradual Red
Rapid Auto Colour Change
Automatic
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
=30m
Transformer
Light
P11 SPARE PART LIST
UL-CP100
Key No.
Part No.
Description
Qty
1
03011321
M5*20 Screw (316#)
1
2
01050102
Face plate
1
3
01110027
Compression screw
1
4
01040212
Lights Lens
1
5
E041204
Bulb 12V/75W for ULH/ UL-NS
1
6
03011132
M4*8 Screw
3
7
03011150
Screw
2
8
04011031
Lamp Socket
1
9
03013039
But
2
10
03017118
Reflector Plate
1
11
04014016
Closed-End Wire Connector
2
12
02021084
O-Ring for UL-CP100
1
13
01231008
UL-CP100 Light Body Set
(
with 2.5M cable and socket)
1
14
89044501
Vinyl pool Fitting for P100
1
15
89040203
Fitting for Concrete Pool
1
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
****
In case of replacement of an old LED-CP100 / TP100 / P100 Auto-Color light by a new LED-CP100
RGB model (15 preset programs), please note:
1) All the lights can be synchronized in "Automatic color change" mode that is pre-installed on the new LED-
CP100 / TP100 / P100 RGB lights as a Program 1.
Synchronization instructions: Turn off / turn on the light ever y 2 seconds to select a Program 1 on the LED-
CP100 / TP100 / P100 RGB. it stays on. It takes 10 seconds to get fixed the Program (color). From then on, all
the lights will be synchronized, and the color will be changed automatically.
2) To use all 15 preset programs, all the old LED-CP100 / TP100 / P100 Auto-Color lights must be replaced with
new LED-CP100 / TP100 / P100 RGB version.
****
/ TP100 / P100
