INSTALLATION P4
1.1 PRODUCT INFORMATION
Model
EFFECTIVE FITRATION
AREA
ICF230
ICF330
ICF430
ICF530
ICF680
CODE
DESIGN FLOW RATE
Residential Commercial
FT²
21.37
30.73
39.97
49.19
63.13
M²
86.2
123.6
150
150
150
GPM
327
468
575
575
575
LPM
1.2 DIMENSIONS
IN
20.9
20.9
20.9
20.9
20.9
CM
53
53
53
53
53
IN
9.8
12.2
18
25.4
31
CM
25
30.8
45.6
64.4
78.4
IN
23.7
23.7
23.7
23.7
23.7
CM
60.2
60.2
60.2
60.2
60.2
ICF230
ICF330
ICF430
ICF530
ICF680
230
330
430
530
680
Model
IN
1.91
1.91
1.91
1.91
1.91
CM
4.85
4.85
4.85
4.85
4.85
A
B
C
D
9140404
9140405
9140406
9140407
9140408
A
B
[ Filter rate for commercial use at 0.375 GPM/ft². Recommend Flow Rate for 2” piping is 90
x 150 GPM ]
≤
≤
D
C
2. INSTALLATION
This product should be installed and ser viced only by a qualified pool professional.
1. The filter system should be installed on a level concrete slab or another rigid base. Select a well-drained and
vented area, one that does not flood when it rains. Position the filter so that the piping connections and
winter drain are convenient and accessible for operation, ser vice, maintenance, and winterizing.
2. Position filter body such that all operation and safety labels are visible.
3. Position filter so the filter will drain by gravity.
4. If practical, place the pump and filter in the shade to shield it from direct sunlight.
5. Connect the pool suction plumbing between the skimmer, pool outlet (from the pool), and the pump.
6. Install the plumbing from the filter to the pool (return to the pool).
7. Do not locate pump controls over or near the filter.
8. Verify water discharge from the air relief valve is directed away from electrical devices.
