IMPORTANT SAFETY INSTRUCTIONS P2
IMPORTANT SAFETY INSTRUCTIONS
THESE OPERATING INSTRUCTIONS CONTAIN IMPORTANT INFORMATION ON THE
SAFE, PROPER, AND ECONOMICAL OPERATION OF THIS SWIMMING POOL
APPLIANCE. STRICT OBSERVATION OF THE OPERATING INSTRUCTIONS WILL HELP
TO AVOID DANGERS, REDUCE REPAIR COSTS, AND SHUTDOWN TIMES AND
INCREASE THE RELIABILITY AND WORKING LIFE OF THE PRODUCT.
Failure to follow the instructions in this manual may result in serious adverse health effects or even serious or
fatal injur y. Failure to follow the instructions in this manual will in all cases invalidate all guarantees and liability
on the part of the manufacturer.
Consumer Information and Safety
These Cartridge Filters are designed and manufactured to provide years of safe and reliable operation.
Operated and maintained according to the information in this manual and the installation codes referred to in
later sections.
THIS FILTER OPERATES UNDER HIGH PRESSURE
When any part of the circulating system, (e.g., closure, pump, filter,
valve(s), etc.), is ser viced, air can enter the system and become
pressurized. Pressurized air can cause the top closure to separate
which can result in severe injur y, death, or property damage. To avoid
this potential hazard, follow these instructions:
1. If you are not familiar with your pool filtering system:
(1) Do NOT attempt to adjust or ser vice without consulting your dealer, or a qualified pool technician.
(2) Read the entire Installation & Operation Manual before attempting to use, ser vice, or adjust the pool
filtering system.
2 Before repositioning valve(s) and before beginning the assembly, disassembly, or any other ser vice of the
circulating system:
(1) Turn the pump OFF and shut OFF any automatic controls to ensure the system is NOT inadvertently started
during the ser vicing;
(2) Open the air relief valve;
(3) Wait until all pressure is relieved.
3 Whenever installing the filter closure follow the filter closure warnings exactly.
4 Once ser vice on the circulating system is complete follow initial start-up instructions exactly.
5 Maintain circulation system properly. Replace worn or damaged parts immediately, (e.g., closure, pressure
gauge, valve(s), O-rings, etc.).
6. Be sure that the filter is properly mounted and positioned according to the instructions provided.
.
.
.
.
This filter must be installed by licensed or certified electrician or qualified pool ser viceman
in accordance with the Local Code and all applicable local codes and ordinances.
Improper installation could result in death or serious injur y to pool users, installers, or
others and may also cause damage to property.
Always disconnect power to the pool circulating system at the circuit breaker before
ser vicing the filter. Ensure that the disconnected circuit is locked out or properly tagged so that it cannot be
switched on while you are working on the filter. Failure to do so could result in serious injur y or death to a
ser viceman, pool user, or others due to electric shock .
