EMAK EFCO M 2200, Operators Instruction Book

Page: 37 / 202

33
I
GB
F
D
E
SK
P
GR
TR
CZ
RUS
UK
PL
ENVIRONMENTAL PROTECTION
Environmental protection should be a priority
of considerable importance when using the
machine, for the benefit of both social cohesion
and the environment in which we live.
- Try not to cause any disturbance to the
surrounding area.
- Scrupulously comply with local regulations
and provisions for the disposal of oils, petrol,
batteries, filters, deteriorated parts or any
elements which have a strong impact on the
environment. This waste must not be
disposed of as normal waste, it must be
separated and taken to specified waste
disposal centres where the material will be
recycled.
Demolition and disposal
When the machine reaches the end of its
service life, do not dispose of it into the
environment; instead take it to a waste disposal
centre.
Most materials used in the manufacture of the
machine are recyclable; all metals (steel,
aluminium, brass) can be delivered to a normal
recycling station. For information contact your
local waste recycling service. Waste disposal
must be carried out with respect for the
environment, avoiding soil, air and water
pollution.
WARNING! Dispose of the batteries
separately from the machine!
In all cases, applicable local legislation must
be complied with.
WA R N I N G ! A l s o r e a d t h e b a t t e r y
and battery charger instruction and
maintenance manual!
10. TECHNICAL DATA
Voltage 36 V DC
Oil tank capacity 100 cm
3
(0.1 ℓ)
Chain lubrification Automatic not adjustable
No.of pinion teeth 6
Weight without battery 4.5 kg
Recommended guide bar and chain combinations
Chain pitch and gauge 3/8" x.050"
Guide bar length 12" (30 cm)
Type of guide bar 120 SDEA 041
Type of chain 91PX045X
Cutting length 270 mm
WARNING!!!
The risk of kickback is greater when using a combination bar/chain wrong! Use only the
combination bar/chain recommended and follow the instructions for sharpening.