EMAK Blizzard 17,5 H, User Manual

Page: 46 / 338

46
Overloading the machine while driving on a slope more than 10° (15°) can damage the
transmission.The manufacturer is not responsible for such damage.
5.6 EMPTYING THE GRASS CATCHER
The grass catcher fill level is signalled by the basket fill lid. The basket fill can be regulated
using the sliding parts of the lid (lengthening or shortening of the arm).
(1) Sliding part pulled out = minimal basket fill
(2) Sliding part pushed in = maximum basket fill
5.6a
Emptying process:

Drive the machine to the place where you want to empty the grass catcher. Stop the machine and set
the brake. If it is on a slope, use the parking brake.

Shut off the mowing mechanism by pressing the switch downward.

If the machine has an AUT/MAN switch, leave it in the “AUT” position.

Set the accelerator lever to the “MIN” position.

On machines with hand-lifted and -tilted catchers:
Slide the catcher’s lifting lever completely up (1) and by tilting it (2) empty the catcher. Let
it empty freely, gradually loosen it and tilt it back.
5.6b

On machines with mechanically lifted and tilted catchers:
Press the catcher’s emptying switch to the “LIFT” position and hold it down until the catcher has risen
all the way. After the position is reached, let up on the switch and wait for the catcher to empty. Then
press the switch back to the “START” position and hold it down until the catcher has tilted all the way.
After the position is reached, let up on the switch.

After tilting the catcher to the basic position, turn the mowing mechanism on using the lever switch.
6. MAINTENANCE AND ADJUSTMENTS
Proper, regular maintenance and inspection of the machine helps extend the mower‘s life and problem-
free operation. Worn-out or damaged parts must be replaced in a timely manner. Always use original
replacement parts. Other replacement parts can damage the machine and endanger the health of the
driver and other persons and void warranty claims. To order replacement parts, always contact the
manufacturer or an authorized service facility.