Screw the mounting plate to the wall with the
30 mm screws. The hooks must point upwards.
Place the charging station with the backside
from above on the holding plate. Make sure
that the eyelets are correctly positioned in the
hooks of the holding plate.
Mount the holder for the charging connection
and the hook for holding the cable also on the
wall.
3
4
6
(ST)
Screw the type 2 plug of the charging
station into the drill holes provided.
5
No liability for possible damage will be accepted in the event of incorrect operation.
If you need technical support, please contact our support team via our
website www.em2go.de.
Important Note:
According to §19 NAV of March 21, 2019, the operation of charging devices for electric
vehicles must be reported to the responsible electricity provider before use (from 11 KW)
and before installation (from 22 KW).
This can also be done by the commissioned electrician.
Please contact your electricity provider by phone or online for more information.
Warranty and maintenance
• The warranty period for this charger is two years.
• The warranty expires if:
• No proof of purchase can be provided.
• The warranty period specified by the manufacturer is exceeded.
• The instructions for use, maintenance and storage are not followed.
• Damage or malfunction is caused by the ingress of foreign objects.
• In case of repair, disassembly or modifi cation by unauthorized persons.
• Damage caused by force majeure (such as lightning, overvoltage, earthquake, fire,
flood, etc.).
• Damage and malfunctions caused by other avoidable external factors.
• Damage and malfunction caused by improper use of the equipment, such as the ingress of
water or other liquids.
• Damage and malfunction caused by the mains power supply and a voltage not specified for
use with the charger.
We hereby declare, that this device carries the CE mark in accordance with the
regulations and standards. It conforms with the fundamental requirements of the of
(REDF) 2014/53/EU. EMC Directive 2014/30/EU, and the Low Voltage Directive
2014/35/EU. The full text of the EU declaration of conformity is available at the
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the national legal
system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end
of their service lives to the public collecting points set up for this purpose or point of sale.
Details of this are defined by the national law of the respective country. This symbol on the
product, the instruction manual or the package indicates that a product is subject to these
regulations. By recycling, reusing the materials or other forms of utilising old devices, you are
making an important contribution to protecting our environment.
GB
6
Cable Type
Socket Type
