EM TEST
EFT 500 Series
Manual for Operation
V 2.00
5 / 21
2.
Operation
2.1.
Description of the menus
The simulator is operated by an easy menu control system.
Seven function keys are available to select parameters and
functions.
The selected parameter is blinking and can be changed by turning the knob (incr./decr.).
The digit to be changed can be selected with the cursor (
ÍÎ
).
ESC will take you back to the previous level in the menu and set the displayed values. The
latest settings are stored automatically and will be recalled when the menu is selected
again.
EXIT will reset the firmware to the main screen.
All functions are indicated on the display; max. 8 lines and 40 characters.
EM TEST
EFT 500
Burst 5/50ns
V 3.20
SWN: 001234
Start-up display example EFT 500
The serial number and the version number SWN are used for traceability reasons. These numbers are listed in
the test reports and calibration certificates. These numbers also are listed within the test reports generated by the
ISM ISO software
2.2.
Main Menu
MAIN MENU
F1 : Quickstart
F2 : User test routines
F3 : Standard test routines acc IEC 61000-4-4
F7 : Service
F1
F2
F3
F4
F5
F6
F7
Quick Start
Easy and fast operation of the equipment without special functions. All parameters can be adjusted during the
running test.
User Test Routines
The user can program, save and recall his own specific test routines. He can select standard routines or special
functions such as automatic change of voltage or frequency during a test routine.
Test Routines as per IEC 61000-4-4
The user can call up the standard routines as per IEC 61000-4-4 and start them immediately.
Service
Set-up menu of the generator.
