EM TEST
AutoWave
Manual for Operation
V 5.9.1
32 / 45
3.2.7. DUT Monitor
Open collector input for event control during a test or record.
The
DUT Monitor 1
and
DUT Monitor 2
control the behavior during a
test or record. The following settings are offered for the two DUT monitor
inputs
Default :
Disabled
Settings
DUT Monitor ( open collector input)
-
Disable
: Input has no function
-
Notify
:
Message will be written on a file
-
Stop
:
Wave stops and continue according the user decision
3.2.8. GPIB Address
GPIB Address for using the AutoWave with the software iso.control
Standard : IEEE 488
Address :
1...30
Default :
18
Default address for iso.control software
3.2.9. Ethernet IP- Address
Set Ethernet IP Address of the target AutoWave
Selectable range :
0.0.0.0 to 255.255.255.255
Default Address :
10.0.0.2
3.2.10. Ethernet Netmask
Set Ethernet Netmask of the target AutoWave
Selectable range :
0.0.0.0 to 255.255.255.255
Default Netmask :
255.0.0.0
3.2.11. Ethernet Gateway
Set Ethernet Gateway of the target AutoWave
Selectable range :
0.0.0.0 to 255.255.255.255
Default Gateway :
10.0.0.1
