16
GB
SAFETY INSTRUCTIONS FOR INSTALLERS
- Carefully read the instructions on this leaflet: they give important information on the safety, use and mainte-
nance of the installation.
- After removing the packing, check the integrity of the set. Packing components (plastic bags, expanded po-
lystyrene etc.) are dangerous for children. Installation must be carried out according to national safety regu-
lations.
- It is convenient to fit close to the supply voltage source a proper bipolar type switch with 3 mm separation
(minimum) between contacts.
- Before connecting the set, ensure that the data on the label correspond to those of the mains.
- This apparatus must only be used for the purpose for which it was expressly designed, e.g. for audio or video
door entry systems. Any other use may be dangerous. The manufacturer is not responsible for damage cau-
sed by improper, erroneous or irrational use.
- Before cleaning or maintenance, disconnect the set.
- In the event of faults and/or malfunctions, disconnect from the power supply immediately by means of the
switch and do not tamper with the apparatus.
- For repairs apply only to the technical assistance centre authorized by the manufacturer.
- Safety may be compromised if these instructions are disregarded.
- Do not obstruct opening of ventilation or heat exit slots and do not expose the set to dripping or sprinkling of
water. No objects filled with liquids, such as vases, should be placed on the apparatus.
- Installers must ensure that manuals with the above instructions are left on connected units after installation,
for users' information.
- All items must only be used for the purposes designed.
-
WARNING:
to prevent injury, this apparatus must be securely attached to the floor/wall in accordance with
the installation instructions.
- This leaflet must always be enclosed with the equipment.
Directive 2002/96/EC (WEEE)
The crossed-out wheelie bin symbol marked on the product indicates that at the end of its useful life, the
product must be handled separately from household refuse and must therefore be assigned to a diffe-
rentiated collection centre for electrical and electronic equipment or returned to the dealer upon pur-
chase of a new, equivalent item of equipment.
The user is responsible for assigning the equipment, at the end of its life, to the appropriate collection facilities.
Suitable differentiated collection, for the purpose of subsequent recycling of decommissioned equipment and
environmentally compatible treatment and disposal, helps prevent potential negative effects on health and the
environment and promotes the recycling of the materials of which the product is made. For further details re-
garding the collection systems available, contact your local waste disposal service or the shop from which the
equipment was purchased.
Risks connected to substances considered as dangerous (WEEE).
According to the WEEE Directive, substances since long usually used on electric and electronic appliances are
considered dangerous for people and the environment. The adequate differentiated collection for the subsequent
dispatch of the appliance for the recycling, treatment and dismantling (compatible with the environment) help
to avoid possible negative effects on the environment and health and promote the recycling of material with
which the product is compound.
