27
Chapter 5 Remote Configuration
Functions of remote configurations include: System Configuration, Video Configuration, PTZ Configuration, Alarm Configuration,
Network Configuration and Advanced Configuration. You should firstly select the menu on the left, and then setup the relative
parameters. When one user configures parameters of a certain device, other users can not set up this device.
5.1
System Configuration
The “System configuration” includes three sub-menus: Basic Information, Date & Time and SD Card.
5.1.1
Basic Information
In the Basic Information interface, you can set up the device name and check the relative information of the server.
Setting steps:
1. Clicking the “Config” icon will appear the menu list.
2. Clicking the “Basic Information “will pop up a window as shown below:
Parameter
Meaning
Software version
The software of the device
Software build date
The software build date of the device
Kernel version
The kernel version of the device
Hardware version
The hardware version of the device
Mac Address
MAC address of device
Device name
Name of the device
Maximum number of user Support max 6 users to access
5.1.2
Date & Time Configuration
Setting steps:
1. Go to “System Configuration”
“Date & Time”.
EN
