14
ELVO E911D/E911A/E912A
3.4
OPERATING INSTRUCTIONS
E911D
1.
Connect unit to mains.
Switch unit on. Green "Heater"
light will turn on.
2.
The temperature will be read
on digital LED display.
3.
Set nominal temperature by
holding "SET" switch
4.
Rotate temperature control
knob until digital display reads
desired temperature (resolu-
tion
±
1
°
)
5.
Release "SET" switch. Tip
temperature is now rising
and being displayed.
6.
During any work breaks,
move the switch on the
left to "Standby". When start-
ing work again, move it back
to "Heater" so that the tem-
perature last used will be re-
set automatically.
E911A / E912A
Connect unit to mains.
Switch unit on. Green "Heater"
light will turn on.
-
-
Rotate temperature control
knob to the desired tempera-
ture
-
During any work breaks,
move the switch on the
left to "Standby". When start-
ing work again, move it back
to "Heater" so that the tem-
perature last used will be re-
set automatically.
3
ELVO E911D/E911A/E912A
19
5.1
RETURN FOR REPAIRS
Should it prove necessary in the future to send the equipment back
for repair, please proceed as follows :
-
enclose an exact description of the failure, including the
operational mode in which the failure or breakdown first occurred
-
indicate clearly the person that should be contacted in your com-
pany and indicate the telephone and fax number
-
for transportation, please use the original packing material (as far
it is still available). Should this no longer be available, please make
sure that the package protects the equipment adequately.
-
assuming it is necessary and possible, send the entire equip-
ment back (soldering station and mains supply unit, accessories
etc.)
You can of course contact our service or sales departments by
telephone, telex or telefax. Our customer service will gladly
assist you. Addresses are listed in chapter 8
In order to assure best performance in function of your ELVO solder-
ing station, please consider following points. In case of a function
failure, please contact your next ELVO specialist.
5.2
CONDITIONS APPLYING TO SPARE PARTS
Only use original spare parts. Chapter 5.1 contains a list of standard
spare parts.
To use products from another source could harm
•
safety,
•
reliability and
•
performance.
SERVICING
5
