elvita CTS5195V, User Manual

Page: 16 / 22

16 17
© 2021, Elon Group AB. All rights reserved.
DRYING PROGRAMME
The drying cabinet has two automatic programmes:
• Normal dry
• Extra dry
The automatic programmes stop the drying process
automatically when the laundry is dry.
Selecting the drying programme
• Normal dry – used for drying medium-weight
garments.
• Extra dry – used for drying heavier garments and for
deep-drying.
Starting the drying programme
• Last-used drying programme.
Press the power button to turn the cabinet “ON” – the
display lights up and shows the last programme that
was run.
If you want to use this programme press START/STOPP.
Or select a different drying programme using arrow up
orarrow down.
Then start the programme by pressing the START/STOP
button.
• Door open.
If the door is open when a drying programme is
selected and the START/STOP button is pressed, the
display will show “close door”.
Close the door, and the chosen drying programme
should start.
• Drying.
The animated status bar on the left of the display
shows that drying is in progress.
• Condensed water tank
When the condensed water tank is full the drying
process stops immediately and the display shows
“check water tank”. Empty the water tank and restart
the drying process.
• Cool-down
During the cool-down phase the display shows “cool”
and the 5-minute rest time is counted down.
• Programme finish
When the cool-down phase ends, the drying process
is complete and the display shows “finish” (flashing).
When the START/STOP button is pressed or the door is
opened the current programme ends and the display
shows the last-used programme.
_______________________________
NOTE!
In standby mode the display is switched off after 15
minutes and lights up again if one of the buttons on
the control panel is pressed or the door is opened.
_______________________________
NOTE!
Empty the condensed water tank after each drying
cycle.
_______________________________
Ending the drying programme
To interrupt the drying phase, press START/STOP.
Opening the door
If the door is opened during drying, the drying phase
will continue for 5 minutes. The display shows “close
door” and the programme will start a 5 minute count-
down.
If the door is closed within this 5-minute period the
drying phase will continue.
If the door is left open the drying phase will be
cancelled after 5 minutes and will have to be restarted
manually.
If you want to end the drying phase immediately,
without the 5-minute pause, press START/STOP.