elvita CSJ4320S, User Manual

Page: 11 / 54

10 11
© 2022, Elon Group AB. All rights reserved.
ties come out [Fig. 7].
- When the soleplate has cooled down, you can clean it with a damp cloth.
LIGHTING FUNCTION
- Press rear cover light switch [Fig. 8].
- Use the front lights of the iron to illuminate the corners of the clothes when
ironing [Fig. 9].
HOW TO PUT IT AWAY
- Disconnect the plug of the iron from the socket.
- Empty the reservoir by turning the iron upside down and gently shaking it.
- Leave the iron to cool down completely.
- Roll up the power cord [Fig. 10].
- Always put the iron away in a vertical position.
ADVICE FOR GOOD IRONING
We recommend using the lowest temperatures with fabrics that have unusual
finishes (sequins, embroidery, flush, etc.).
If the fabric is mixed (e.g. 40% cotton 60% synthetics), set the thermostat to
the temperature of the fibre requiring the lower temperature.
If you don’t know the composition of the fabric, determine the suitable
temperature by testing on a hidden corner of the garment. Start with a low
temperature and increase it gradually until it reaches the ideal temperature.
Never iron areas with traces of perspiration or other marks: the heat of the
plate fixes the stains on the fabric, making them irremovable.
The sizing is more effective if you use a dry iron at a moderate temperature:
excess heat scorches it with the risk of forming a yellow mark.
To avoid marking silk, woolen or synthetic garments shiny, iron them inside
out.
To avoid marking velvet garments shiny, iron in one direction (following the
fibre) and do not press down on the iron.
The heavier the washing machine is loaded, the more garments come out
creased. This also happens when the spin drying revolutions are very high.
Many fabrics are easier to iron if they are not completely dry.
For example, silk should always be ironed damp.