GB
36
3. Use an 8 mm socket driver or spanner to unscrew the
special flange self-tapping screws that hold the right upper
hinge (support the upper door with your hand while doing
this).
4. Remove the upper hinge pin, transfer it to the opposite
side and tighten securely, then put the hinge in a safe place.
5. Lift the upper door and set it on a non scratching surface
with the outside up.
NOTE:
When removing the door, watch out for washer(s)
between the middle hinge and the bottom of the freezer door
that may stick to the door. Do not lose them.
6. Unscrew the two special flange self-tapping screws that
hold the middle hinge, then remove the middle hinge that
holds the lower door in place.
7. Lift off the lower door and set it on a non-scratching
surface with the outside up.
NOTE:
When removing the door, watch out for washer(s)
between the middle hinge and the bottom of the freezer door
that may stick to the door. Do not lose them.
8. Remove the screw hole covers from the left holes as
illustrated and transfer them to the uncovered holes on the
right side.
9. Lay the refrigerator on soft foam packaging or similar
material. Remove both adjustable bottom feet, and
remove the front feet support plate and the lower hinge by
unscrewing the special flange self-tapping screws.
10. Unscrew the bottom hinge pin, transfer it to the hole on
the other side of the hinge and screw it in place.
11. Replace the lower hinge on the left side and fix it with
the special flange self-tapping screws. Transfer the front feet
support plate to the opposite side and fix it with the special
flange self-tapping screws. Install the adjustable bottom feet.
12. Lift the lower door into its new position, adjust the lower
hinge, insert the hinge pin into the bottom hole of the lower
door, then tighten the bolts.
13. Turn the middle hinge upside down, transfer it and adjust
its position. Insert the middle hinge pin into the top hole in
the lower door, then tighten the bolts.
14. Raise the upper door into the appropriate position.
Ensuring that the door is level, insert the middle hinge pin
into the bottom hole in the upper door.
Right upper hinge part
Front feet
support plate
Lower hinge part
Adjustable
bottom feet
Special flange
selftapping screws
Special flange
selftapping screws
Lower hinge part
Front feet support plate
Adjustable bottom feet
Special flange
selftapping screws
Special flange
selftapping screws
Middle hinge part
Screw hole cover
Screw hole cover
Screw hole cover
Screw hole cover
