26
© 2021, Elon Group AB. All rights reserved.
3. USING THE PRODUCT
(The photos below are only intended as illustrations and may therefore differ slightly in
appearance from your product.)
REMEMBER
1. Insert the hose in the intake socket at the front of the vacuum cleaner, push it
into the bayonet fitting and turn clockwise to secure it (Fig. 1).
2. Insert the telescopic tube into the handpiece (Fig. 2).
3. Fit a nozzle that is suitable for the task: Combi nozzle for rugs or floors
(choice of settings to suit surface) (Figs. 3 and 4); brush nozzle for sofas, walls,
curtains, corners, etc.; crevice nozzle for narrow spaces.
4. Start the vacuum cleaner: plug the power cord into the wall socket and
press the on/off switch (Fig. 6).
5. To wind up the cable, hold down the button marked with the plug symbol.
(Fig. 7).
6. The floor nozzle can be stored on the hanger at the rear of the vacuum
cleaner when the machine is not in use (Fig. 8). There is also a hanger
underneath the vacuum cleaner to permit upright storage.
