elvita CDM6601V, User Manual

Page: 87 / 152

GB
87
Starting a wash cycle
1. Slide out the lower and upper baskets, load the dishes and push them back. It is recommended that you load the lower
basket first, then the upper one.
2. Pour in the detergent.
3.
Insert the plug in the socket. For information on the electrical supply, refer to the last page “Product fiche”. Make sure
that the water supply is turned on at full pressure.
4. Close the door and press the Power button to turn on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause button; the dishwasher will start its cycle.
Changing the program mid-cycle
A wash cycle can only be changed if it has been running for a short time, otherwise the detergent may have already been
released and the dishwasher may have already drained the wash water. If this is the case, the dishwasher needs to be reset
and the detergent dispenser must be refilled. To reset the dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press the Program button for more than 3 seconds – the program will cancel.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds the dishwasher will start.
Forget to add a dish?
A forgotten dish can be added any time before the detergent dispenser opens. If this is the case, follow the instructions
below:
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button after 10 seconds, the dishwasher will start.
WARNING
It is dangerous to open the door mid-cycle, as hot steam may
scald you.