GB
69
3
Larger food remnants can be remo-
ved by rinsing the filter under running
water.
For more thorough cleaning, use a soft
cleaning brush.
4
Reassemble the filters in the reverse
order of disassembly, replace the filter
insert, and rotate clockwise to the
close arrow.
WARNING
•
Do not over-tighten the filters. Refit the filters securely in the correct order,
otherwise coarse debris could get into the system and cause a blockage.
•
Never use the dishwasher without the filters in place. Incorrect repla
-
cement of the filters may reduce the performance of the appliance and
damage dishes and utensils.
Spray arms
It is necessary to clean the spray arms regularly, as deposits
from hard water chemicals may clog the spray arm jets and
bearings.
To clean the spray arms, follow the instructions below:
1
To remove the upper spray arm,
hold the nut in the centre still and
rotate the spray arm counter-clock-
wise to remove it.
2
To remove the lower spray arm, pull
the spray arm upward.
Wash the arms in warm, soapy water
and use a soft brush to clean the
jets. Replace them after rinsing them
thoroughly.
3
Summary of Contents for CDM6601V
