9
© 2021, Elon Group AB. All rights reserved.
Check that the following parts are included in the packaging:
4 support feet with 4 nuts
2 wall mountings
2 M8 bolts with 2 nuts
1 wire basket
When installing the washing machine pedestal take the
following steps before use:
1) Adjust the support feet on each of the pedestal legs.
2) Using a spirit level, adjust the support feet so that the pedestal is level and does not rock.
Note! Tighten the nuts to ensure that the support feet are locked.
3) Fit the wall brackets to the pedestal using the M8 bolts supplied.
If the wall is clad with plasterboard or chipboard, use 6/-hollow wall anchors.
If the wall is made of concrete, use M6 expansion bolts.
If fastening to other materials, ask the retailer for advice.
4) Then place the machine on the pedestal.
WE HOPE YOU WILL BE VERY SATISFIED WITH YOUR NEW
WASHING MACHINE PEDESTAL FROM ELVITA!
