POWerING
ON & OFF
8
There are three ways to
power the FieldVision: the
4-pin XLR input, a standard
camera battery (see
Specifications on page 24
for compatible battery
types), and a three-stud or
a V-mount battery.
4-PIN XLR
To power the FieldVision
via the 4-pin XLR
connector, use a compatible
cable to connect the
FieldVision’s 4-pin XLR DC
power input to your power
source.
You can also use the included the 4-pin XLR power and
tally cable with either a 4-pin XLR cable connected to a
compatible power source, or with the included 12 V DC
adapter plugged into an AC power source.
To power the FieldVision via the 4-pin XLR power and tally
cable, follow these steps:
1. Fully insert the 4-pin XLR power and tally cable into the
4-pin XLR DC power input on the back of the monitor.
The connector should click into place when fully
inserted.
2. Use either a 4-pin XLR cable or the included 12 V DC
adapter to connect the corresponding connector on the
power and tally cable to your power source.
To turn on the FieldVision while using the
12
V DC adapter
or any other power source that uses the 4-pin XLR
connection, press the power switch to the “
12
V” position.
9
4-Pin XLR
Male
2.1mm DC
Input
Green
Tally
Red Tally
Tally
Ground
4-Pin XLR
Female
