Elvid OCM-7B-DV2, User Manual, Page: 28 / 32

28
PROBLEM SOLUTION
The FieldVision will not
turn on. • If you are powering the FieldVision
with a battery, make sure the
battery is fully charged and
properly seated in the battery plate.
• Make sure that the 12 V DC adapter
is fully plugged in, and that your
AC power source is reliable. Try
switching AC power sources.
The FieldVision is turned
on, but there is no
onscreen image or the
image is weak. • Make sure the HDMI or composite
video cable is securely plugged
into the proper input connection
on the FieldVision, and that the
input mode is set correctly. Try
pressing the Mode button to set
the input mode.
• Make sure the monitor is set to
the proper input mode.
• If you are powering the FieldVision
with a battery, make sure the
battery is fully charged and
properly seated in the battery plate.
• Check your cables to make sure
they are reliable.
The screen displays only
a black and white image. • Check the brightness, contrast,
hue, and saturation settings, and
adjust as necessary.
• Make sure the Check Field and
Focus Assist modes are turned off.