Elvid OCM-7B-DV2, User Manual, Page: 12 / 32

12
MOUNTING THE FIELDVISION
Use the FieldVision’s 1/4
″
-20 threaded socket to attach the
monitor to your mounting system or use the included ball
head. Make sure your bracket can support the monitor.
CONNECTING THE VIDEO SOURCE
HDMI Input : The FieldVision is equipped with an HDMI input
for use as a wired high-definition video monitor.
1. Use a compatible HDMI cable (such as the included mini to
full-size HDMI cable) to connect your HDMI video source to
the FieldVision’s HDMI input.
2. Press the Mode button to switch between the input modes
until HDMI appears on the monitor. If your HDMI video
source is sending a signal to the monitor, the image will
appear onscreen, and the status LED will glow green.
Attention: To avoid feedback when monitoring through the
speaker, plug in headphones or turn down the volume by
pressing and holding the Left Nav/Vol - button.
USING THE
OCM-7B-DV2