Elvid OCM-7B-DV2, User Manual, Page: 13 / 32

13
Composite Video Input : The FieldVision also has composite
video input for use as a wired standard-definition video monitor.
1. Use a composite video cable (not included) to connect your
video source to the FieldVision's composite video input.
Use an RCA audio cable (not included) to connect the audio
output to the FieldVision's audio input.
2. Press the Mode button to switch between the input modes
until AV appears on the monitor. If your composite video
source is sending a signal to the monitor, the image will
appear onscreen, and the status LED will glow green.
Note: When using the composite video input, your audio
source must be plugged into the FieldVision’s audio input in
order to monitor the sound.