CMi6140
User’s Manual English
CMi6140
User’s Manual English
page | 5 (38)
[2022-09]
V1.2
2 Important usage and safety information
The following safety precautions must be observed during all phases of the operation, usage, service or
repair of any CMi Series product. Users of the product are advised to convey the information to users and
operating personnel and to incorporate these guidelines into all manuals supplied with the product.
Failure to comply with these precautions violates safety standards of design, manufacture and intended
use of the product. Elvaco AB assumes no liability for customer’s failure to comply with these
precautions.
CMi6140 receives and transmits radio frequency energy while switched on. Remember that interference
can occur if the product is used close to TV sets, radios, computers or inadequately shielded equipment.
Follow any special regulations and always switch off the product wherever forbidden, or when you
suspect that it may cause interference or danger.
The device or antenna of the product must not be mounted closer than 0.5 m from areas where people
are staying permanently in order not to risk exposing people to RF fields.
To use the product's NFC TAG, follow the instructions issued by the manufacturer of the NFC reader for
safe and efficient operation.
Ensure yourself that power supply and/or battery-unit connected to CMi6140 fulfil EN 62368-1 or
equivalent safety standard.
For guaranteed lifetime of a battery-operated device, configuration and settings must be approved by
Elvaco and not changed during the lifetime of the device.
