19
CAUTION!
1. When the power is restored after a power outage, please wait with resuming dehumidification
operation for at least three minutes to avoid any damage to the compressor unit.
2. Always put the appliance on a sturdy and level floor and ensure adequate ventilation. Leave at
least 30cm of free space around the appliance (if no drainage hose is connected).
3. During defrosting the dehumidification indicator will flash and the compressor will be idle.
WATER DRAINAGE
Water tank
The control indicator W. F. (WATER FULL) starts flashing, when the water tank has reached its
maximum filling level. An audible alarm signal sounds simultaneously.
1. Remove the water tank from the appliance and empty the tank.
2. Reinsert the empty water tank by sliding it back into place.
BEWARE
: Always empty the water tank before you move the appliance to another place or before it
is put away for storage!
How to remove the water tank from the appliance
1. With one hand take hold of the grip recess at the side of the tank and pull it forward, with
the other hand press down the retaining tab in the center top of the water tank until the tank
pulls free from the appliance. Then carefully slide
the water tank straight out and empty it.
2. Slide the water tank back into its place until the
retaining tab snaps into locking position.
