background image

8

Safety Precautions

1. Transporting

 

•  When moving, be sure to stop the fan and unplug the power plug.

 

•  Please hold the fan base or handle (belt) firmly to prevent it toppling and hurting people.

2. Power cord

    •  Before carrying out maintenance work or moving the body, please disconnect the power   
 

  cord from the AC power socket.

    •  Do not pinch, bend or twist the AC power cord excessively, otherwise the cord may be    
 

  exposed or broken.

    •  Do not use an inappropriate AC outlet.
    •  Do not use the AC power cord provided by this product on any other device.
    •  If the power cord is damaged, it must be replaced by professionals from the manufacturer,  
 

  its maintenance department or a similar department to avoid danger.

3. Usage

 

•  Please refer to the voltage and frequency ratings on the specification label before use, 

 

  and  ensure it is appropriate with the supplied voltage.

 

•  Do not insert your fingers or other objects into the front and rear guard during use to    

 

  avoid causing danger.

 

•  In the case of abnormal sound, peculiar smell, high temperature, irregular rotation of the  

 

  fan or other abnormalities, please stop using the product immediately.

4. Warning (improper use many cause, electric shock, fire, personal injury, and other damages)

   •  Do not use this product on unstable places where it might be toppled easily.
   •  Do not use this product in a place where there are unstable objects nearby.
   •  Do not use this product in a hot and humid environment such as the bathroom.
    •  Do not use this product when the power cord is damaged or the power cord plug is loose.
   •  Do not use this product if the front guard of the fan is not installed or the rear cover of  
 

  the fan is loose or falls off.

   •  Do not allow children or adults who do not understand this manual to operate this product.
   •  It is forbidden to replace the power cord without authorization, connect the power cord  
 

  halfway or use it in parallel with other electrical appliances.

   •  Do not place the fan body near any water source.
   •  It is forbidden to disassemble, refit or repair internal components without authorization.
   •  Do not climb or sit on this machine.
   •  It is forbidden to store inflammables and explosives around the fan body. Do not place them  
 

  near any heat source.

Please read this manual carefully before use. The company reserves the right to interpret 
the instructions. The appearance of the actual product shall prevail. In the case of product 
technology or software upgrades, there will be no prior notice.

NOTICE

Summary of Contents for EF30













Reviews: