Control panel
Button Description
Display
ECO
Button
Usage
Function
Description
1. Plug in the power supply and it enters standby mode. Press this button to start the fan.
During the first use, the startup wind speed is “3”. If the fan is turned on again after
standby mode, the fan defaults to the wind speed that was last used.
2. When the fan is running, press this key again to stop the fan.
1. Press the button once, fan head oscillates left & right, up & down at the same time.
There will be no light indication;
2. Press the button for a second time, only left & right oscillation, up & down oscillation
will be turned off. There will be no light indication;
3. Press the button for the third time, only up & down oscillation, left & right oscillation
will be turned off. There will be no light indication;
4. Press the button for the fourth time, all oscillations to cease.
When the fan is running, you can press this button to set the timer to off the fan.
Press this button to set the timer in the following duration cycle (2h -- 4h -- 6h -- 8h
–cancel timer --2h -- 4h--…) , the corresponding light indicator will light up.
Note:
1. Short press this button to adjust the wind speed, long press this button to change the mode.
2. When the fan is running, press this button to toggle the wind speed in the following cycle (1-2-3-1…); the
corresponding speed indicator will be on.
3. With a continuous power supply while the fan is in standby mode, the oscillating head will return to its original
position.
4. Wind Modes :
4-1. Whirlwind
: The "3" wind speed of normal mode will be turned on.
4-2. ECO wind
: Simulate the effect of natural wind blowing.
4-3. Baby wind
: The "1" wind speed of normal mode will be turned on.
5. Timer set function : Function can only by controlled on the remote control.
2
1. Short press this button to adjust the wind speed, long press this button to change
the mode.
2. When the fan is running, press this button to toggle the wind speed in the following cycle
(1-2-3-1…); the corresponding speed indicator will be on.
3. When the fan is running, press and hold this button to change the wind mode;
Press and hold to toggle between these modes (Whirlwind - ECO wind - Baby wind -
Normal mode – Whirlwind….) The default is normal mode. The wind speed can only be
adjusted in normal mode, and not in other wind modes.
