Speed
Mode
Pre-On
Pre-Off
Light
Oscillate
Mute
Polarity of battery
Incorrect installation will cause leakage and corrosion of the battery and damage
the remote control.
Please observe the following precautions:
1. When replacing the battery, be sure to use a brand new battery
2. Do not attempt to change, short circuit or disassemble the battery to avoid danger.
3. Please install the battery according to the + and – polarity as shown.
4. When not in use for extended periods, please take out the battery to avoid battery
leakage.
Please recycle the waste battery
※
When the battery is drained, please discard or recycle it accordingly in the bins
designated by local authorities to avoid polluting the environment.
On/Standby
Turn off or on the indicator light.
Set the appointed shutdown time, up to 8h.
Turn on/off the left & right head oscillation.
Turn on/off the up & down head oscillation.
Switch wind mode.
Function Description
Function
3
Remote Control Operating Instruction
• Remove the insulation sheet from the remote control before use.
• Batteries contain many heavy metals, acids, alkali and other substances,
which threaten human health; Waste batteries should be recycled accordingly.
NOTICE
Fan to start up after the appointed time, for up to 8h.
This function can only set the appointed time to start the fan;
the fan speed and oscillation cannot be pre-set.
Turn off or on the control panel buzzer sound.
Toggle between the fan speeds.
