6
3
1. Unpack the screen carefully, check if the screen is in good condition
2.
Be sure the ground wire is connected with power cable to avoid electric shock
3.
Find the wall or ceiling placement for the screen mounts, make sure everything is
level
4.
Attach the screen mounts to the wall or ceiling, then mate the mount into the
screen railing to lock the screen into place
5.
Refer to the diagrams below for more details
Installation
Installation Notes
1.
Install the screen away from direct sunlight, keep screen material exposure to
UV to a minimum
2.
Install in a room without excess humidity
3.
Keep screen away from devices (heaters, etc.) that cause large changes in tem
-
perature and humidity
4.
Handle screen with care, avoid vibrations and drops
Screen mount
Screen mount mated to screen rail
Operating Notes
1.
Do not run the screen continuously for more than 5 minutes, the motor will
shut down after more than five minutes of continous use to prevent overheat
-
ing
2.
Unplug the screen when screen is not to be used for an extended period
3.
Check and replace battery if remote stop working
4.
Do not pull on control wire to support to prevent screen malfunction and elec
-
tric shock
5.
Never disassemble the limit switch
Control Panel
1. The upright position for the control wall panel is shown in the picture. The cable
should come out from the bottom of the control wall panel.
2. The button closest to the IR sensor is the up button.
3. The second button from the top is the stop button.
4. The last button from the top is the down button
IR Sensor
Summary of Contents for Titon Tab Tension
Page 2: ...2 7 Exploded View ...
Page 6: ......
