Elumen8 MP180 LED Fresnel RGBALC, User Manual

Page: 9 / 16

www.prolight.co.uk MP180 LED Fresnel RGBALC User Manual
9
Dimming curves
To access the units dimmer curves, press the “MENU” button to show “DIMCURVE” on the LCD display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to set the dimming curve required.
“Linear” - Linear dimming curve
“S-Curve” - S-Curve dimming curve
“I-Square” - Inverse Square dimming curve
“Square” - Square dimming curve
Press the “ENTER” button to confirm the setting.
To choose between Halogen and LED dimmer curves, press the “MENU” button to show “DIMMODE” on
the LCD display. Press the “ENTER” button and use the “UP” and “DOWN” buttons to set the dimming
curve mode required.
“LED” - LED dimming curves
“HALOGEN” - Halogen dimming curves
Press the “ENTER” button to confirm the setting.
Manual mode:
To access manual mode, press the “MENU” button on to show “MANUAL” on the LCD display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to set the Red, Green, Blue, Amber,
Lime, Cyan, Strobe, Dimmer and Dimmer Fine from “000” - “255” .
Press the “ENTER” button to confirm the setting.
(000 = LED off, 255 = LED at full brightness).
(000 = Strobe off, 255 = Strobe fast).
HSI mode:
To access HSI mode, press the “MENU” button on to show “HSI” on the LCD display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to set the Hue, Saturation and
Intensity from “000” - “255” . Press the “ENTER” button to confirm the setting.
CCT mode:
To access CCT mode, press the
“MENU”
button on to show
“ClrTemp”
on the LCD display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to set the CCT and Tint from
“000” - “255”
. Press the
“ENTER”
button to confirm the setting.
(001 = magenta, 128 = neutral, 255 = green)
White balance:
To access white balance mode, press the
“MENU”
button on to show
“WhiteBal”
on the LCD display.
Press the “ENTER” button and use the “UP” and “DOWN” buttons to set the Red, Green, Blue, Amber,
Lime, and Cyan from
“000” - “255”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Operating instructions