Elumen8 ELUM430, User Manual

Page: 5 / 24

www.prolight.co.uk Fury 200 DTW 2 Cell Blinder User Manual
5
Installation
Before installing the fixture, the supporting structure (ie. truss) must be able to hold a minimum of 10
times the fixtures weight without any deformation (eg. 15kg - 150kg point load). The fixture must be
secured with a secondary safety attachment when being installed (ie. an appropriate safety cable).
Never stand directly below the fixture when mounting, removing, and/or servicing.
Overhead installation requires experience and qualifications to calculate working load limits, the
material being used at the installation area and periodic safety inspections of the fixture and installation
material. If you do not have the relevant experience and/or qualifications please do not attempt the
installation yourself. The installation should be checked annually by a qualified person.
The eLumen8 Fury 200 can be operated in a number of mounting positions as shown in the diagram
above, hanging upside-down from the ceiling or truss, mounting sideways on truss or stood upright on
a flat level surface. Always use a safety wire as an extra safety precaution to prevent damage/injury
in the event a clamp fails (see the next page for clamp installation). Never use the carry handles for
secondary attachments.