Elumen8 ELUM430, User Manual

Page: 9 / 24

www.prolight.co.uk Fury 200 DTW 2 Cell Blinder User Manual
9
4: Slave
Slave
Yes
DMX address:
To access the DMX address setting, press the
“MODE” button until “3: DMX” is highlighted on
the OLED display. Press the “SET” button and use
the “UP” and “DOWN” buttons to highlight
“1) Address” . Press the “SET” button and use
the “UP” and “DOWN” buttons to select the DMX
address required between 001-512. Press the
“SET” button to confirm the setting.
Slave mode:
To access slave mode, press the “MODE” button
until “4: Slave” is highlighted on the OLED
display. Press the “SET” button and use the “UP”
and “DOWN” buttons to select between “Yes”
and “No” . Press the “SET” button to enter slave
mode when yes is selected.
Main Menu - Defaults are in grey
DMX channel:
To access DMX channel mode, press the “MODE”
button until “3: DMX” is highlighted on the OLED
display. Press the “SET” button and use the “UP”
and “DOWN” buttons to highlight “2) Channels” .
Press the “SET” button and use the “UP” and
“DOWN” buttons to select the DMX channel
required 01/02/04/05/07/10A/10B/13
or 17 selectable. Press the
“SET” button to
confirm the setting.
Operating instructions
Slave
No
3: DMX
DMX
1) Address:
DMX Address
xxx
DMX Channels
xx
DMX
2) Channels: