www.prolight.co.uk
Matrix Tri Pixel Panel 25 MKII
User Manual
15
Rigging with optional flying bracket (ELUM085A):
- This flying bracket is used for hanging vertical arrays of the Tri Pixel Panel 25.
- To attach the flying bracket, first you must remove the supplied hanging bracket from the unit.
To do this simply unscrew the tightening knobs on the side of the unit and slide off.
- On the top of the flying bracket there is 2 clamp points (M12). Please use these to attach suitable
clamps before fitting to the unit.
- Place the flying bracket on top of the unit making sure that both carry handles are folded flat.
Line up the bracket with the steel locating pins.
- Now using a size 8 allen key turn the coffin lock and turn anti clockwise until you hear it lock into
position. Make sure that you hear a click and cannot turn the lock any more.
- Fix 2 suitable safety cable(s) to the safety eyes to make sure the unit cannot
drop more than 20cm should the hanging bracket or clamps fail.
If you cannot lock the bracket as described please check that it is in the correct position before
attempting to join the units. Turn the lock clockwise until the pin is in the correct position see below.
X
LOCK
Rigging
